set protocols bfd profile echo-mode
The set protocols bfd profile echo-mode command can be used to enable BFD echo mode for a profile. This mode is disabled by default.
The delete protocols bfd profile echo-mode command sets the configuration to the default value.
Command Syntax
set protocols bfd profile <profile-name>Â echo-mode
Parameter
Parameter | Description |
profile <profile-name> | Specifies the profile name. The value is a string. |
Usage Guidelines
It is recommended that the transmission interval of control packets to be increased after enabling echo-mode to reduce bandwidth usage. For example: transmit-interval of 2000ms.
Echo mode is not supported on multi-hop BFD sessions.
Example
- Enable BFD echo mode.
admin@Xorplus# set protocols bfd profile p2 echo-mode admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.