Configuring VXLAN
- Tracy Yang (Unlicensed)
VXLAN port number of VXLAN ranges from 4097 to 5119. VXLAN mechanism is based on the limited number of VLANs(0-4094).VXLAN is used to provide more networks for switches or the host. To resolve the problem that pushing the interface' PVID to the untagged packets before encapsulated by the VXLAN header, the user must use this command "ovs-vsctl set interface <interface> type=pica8 options:access-vport=true ". Like this, the untagged packets can be encapsulated by VXLAN header with no VLAN that is pvid of ingress port. And the tagged packets are encapsulated by VXLAN header, the inner VLAN is the VLAN tag of packets that received by ingress port.
1, The port ranges in PicOS are as follows:
| Port Type | Port Number |
VXLAN | 4097-5119 |
2.When the vxlan packets wants to be decapsulated,the mac address(src/dst) in the flow's match means the inner packets' mac address.Other match fields like dl_vlan is the vxlan packets' vlan.
eg:ovs-ofctl add-flow br0 in_port=4097,dl_vlan=1,dl_src=22:11:11:11:11:11,dl_dst=22:22:22:22:22:22,actions=2
3.The vxlan encapsulation flow do not support multiple ingress port(like lag,bond).Because vxlan encapsulation is in vcap,and vcap can not suport multiple ports.
4.Vxlan decapsulation flow's action also support group(type=all,lag-select-group),do not support modify mac or vlan before vxlan port 4097.
Command
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2
Description
- br0: bridge name
- remote_ip=10.10.10.2: the IP address of the peer VXLAN tunnel interface; this IP address will be the destination IP of the encapsulated VXLAN packets
- local_ip=10.10.10.1: the IP address of this VXLAN tunnel interface; this IP address will be the source IP of the encapsulated VXLAN packets
- src_mac==C8:0A:A9:9E:49:1A: the logical MAC address of the VXLAN tunnel interface; this MAC address will be the source MAC of the encapsulated VXLAN packets to next-hop
- dst_mac=C8:0A:A9:9E:14:A5: the next-hop MAC address; this MAC address will be the destination MAC the encapsulated VXLAN packets to next-hop
- egress_port=te-1/1/2: the output port of the encapsulated VXLAN packets
vnid=1234:the key value of VXLAN tunnel,different tunnel has different vnid.
- vlan=1:the vlan of VXLAN tunnel.this vlan will be pop or not according to the pvid of the egress port.
udp_dst_port=4789:the udp destination port of encapsulating packets by VXLAN tunnel.All the encapsulated packets has the this udp dst port.
Examples
configure a VXLAN tunnel
topology
configuration
(1)create a new bridge named br0.
admin@PicOS-OVS$ovs-vsctl add-br br0 -- set bridge br0 datapath_type=pica8
(2)add ports to br0.
admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/1 vlan_mode=trunk tag=1 -- set Interface te-1/1/1 type=pica8 admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/2 vlan_mode=trunk tag=1 -- set Interface te-1/1/2 type=pica8
(3)add a VXLAN port named vxlan1 on te-1/1/2
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2
add a flow to switch
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,actions=output:4097
Send packets to te-1/1/1,te-1/1/2 will receive pakcets that encapsulated by VXLAN header. When VLAN of VXLAN tunnel is the same with the pvid of te-1/1/2,the packets from te-1/1/2 will be stripped VLAN of VXLAN. Or, packets will have two VLANs (outer VLAN is vxlan-vlan, inner VLAN is the pvid of ingress port or original VLAN of packets)
strip a VXLAN header
topology
configuration
User must configure VXLAN port on te-1/1/2 and te-1/1/3,and add some flows to the switches so that packets can be encapsulated or decapsulated and forwarded correctly.
(1) create a new bridge named br0.
admin@PicOS-OVS$ovs-vsctl add-br br0 -- set bridge br0 datapath_type=pica8
(2) add ports to br0.
SwA:
admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/1 vlan_mode=trunk tag=1 -- set Interface te-1/1/1 type=pica8 admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/2 vlan_mode=trunk tag=1 -- set Interface te-1/1/2 type=pica8
SWb:
admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/1 vlan_mode=trunk tag=1 -- set Interface te-1/1/1 type=pica8 admin@PicOS-OVS$ovs-vsctl add-port br0 te-1/1/2 vlan_mode=trunk tag=1 -- set Interface te-1/1/2 type=pica8
(3) add VXLAN port vxlan1 on egress port te-1/1/2 of switcha and switchb
Swa:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2
flow in swa.
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,actions=output:4097
Swb:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.1 options:local_ip=10.10.10.2 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac= C8:0A:A9:9E:14:A5 options:dst_mac= C8:0A:A9:04:49:1A options:egress_port=te-1/1/2
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=4097,actions= output:1
send packets to te-1/1/1 of swa,te-1/1/1 of switchb will receive the orignal packets( the contents of packets are the same with packets that te-1/1/1 of swa received).
configure two VXLAN tunnels on a pair of physical port
topology
configuration
add two pairs of VXLAN ports on te-1/1/2,te-1/1/3
sw1:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2 admin@PicOS-OVS$ admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan2 -- set interface vxlan2 type=pica8_vxlan options:remote_ip=10.10.60.1 options:local_ip=10.10.60.2 options:vlan=2 options:vnid=1122869 options:udp_dst_port=4789 options:src_mac=22:22:22:04:49:1A options:dst_mac=44:44:44:9E:14:A5 options:egress_port=te-1/1/2
flows in sw1,
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,dl_src=22:22:22:22:22:22,actions=output:4097 admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,dl_src=22:22:22:22:22:23,actions=output:4098
sw2:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.1 options:local_ip=10.10.10.2 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:9E:14:A5 options:dst_mac=C8:0A:A9:04:49:1A options:egress_port=te-1/1/3 admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan2 -- set interface vxlan2 type=pica8_vxlan options:remote_ip=10.10.60.2 options:local_ip=10.10.60.1 options:vlan=2 options:vnid=1122869 options:udp_dst_port=4789 options:src_mac=44:44:44:04:49:1A options:dst_mac=22:22:22:9E:14:A5 options:egress_port=te-1/1/3
flows in sw2,
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=4097,dl_src=22:22:22:22:22:22,actions=output:4 admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=4098,dl_src=22:22:22:22:22:23,actions=output:5
send packets to te-1/1/1 of sw1,te-1/1/4 should receive the packets with src_mac :22:22:22:22:22:22,and te-1/1/5 should receive the packets with src_mac 22:22:22:22:22:23.
collaboration between L2GRE and VXLAN
topology
configuration
User must configure VXLAN port and l2gre port on te-1/1/2 and te-1/1/3.Add flows on both switches, so packets can be forwarded correctly.
sw1:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2 admin@PicOS-OVS$ ovs-vsctl add-port br0 l2gre1 -- set Interface l2gre1 type=pica8_l2gre options:remote_ip=10.10.61.10 options:local_ip=10.10.60.10 options:vlan=1 options:l2gre_key=1234 options:src_mac=C8:0A:A9:22:22:22 options:dst_mac=C8:0A:A9:33:33:33 options:egress_port=te-1/1/2
flows in sw1,
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,dl_dst=22:22:22:22:22:22,actions=output:4097 admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=1,dl_dst=22:22:22:22:22:23,actions=output:5121
sw2:
admin@PicOS-OVS$ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.1 options:local_ip=10.10.10.2 options:vlan=1 options:vnid=1122867 options:udp_dst_port=4789 options:src_mac=C8:0A:A9:9E:14:A5 options:dst_mac=C8:0A:A9:04:49:1A options:egress_port=te-1/1/3 admin@PicOS-OVS$ovs-vsctl add-port br0 l2gre1 -- set Interface l2gre1 type=pica8_l2gre options:remote_ip=10.10.60.10 options:local_ip=10.10.61.10 options:vlan=1 options:l2gre_key=1234 options:src_mac=C8:0A:A9:33:33:33 options:dst_mac=C8:0A:A9:22:22:22 options:egress_port=te-1/1/3
flows in sw2,
admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=4097,dl_dst=22:22:22:22:22:22,actions=output:4 admin@PicOS-OVS$ovs-ofctl add-flow br0 in_port=5121,dl_dst=22:22:22:22:22:23,actions=output:5
Vnid must be the same when the user wants to build a VXLAN tunnel between two ports. Different VXLAN tunnels must have different vnids. Besides, packets are not decapsulated when the vnid is different between the VXLAN tunnel. VXLAN can work together with GRE, L2GRE, VXLAN.
Option:
topology
Generally, untagged packets from Host A sent through Swa will be tagged by pvid in port te-1/1/1. The new tagged packet adds VXLAN header and strip VXLAN header through VXLAN tunnel, and will keep the tag while forwarding on Swb te-1/1/1 even though the tag equals the pvid of Swb te-1/1/1. The result is that Host B receives a tagged packet which is different from the original packet.
To avoid the above issue, pica8 support packet keep untag through pica8 switch port. The following command is necessary.
ovs-vsctl set interface te-1/1/1 options:access-vport=true
If the user adds the command on Swa, untagged packets that pass through Swa te-1/1/1 will not be tagged by the pvid, then pass through VXLAN tunnel and stay untagged while forwarding to Swb te-1/1/1. The result is Host B will receive untag packet.
vxlan numbers
User can create 1023 VXLAN ports at most (with the same mac, ip, vlan, only vnid is different) on one physical port. But the max flows number of VXLAN flow (with action=output:4097) is the minimum value of flows number that Vfilter table and Tcam table can support. That is 512 on P5401, P5101, AS6701, P5712,2632,tomahawk chip
Configure VxLAN Ecmp
From version 2.9.1, Pica8 switch support configuring Vxlan ecmp.That is to say,the traffic can hash to one or more ports of the ecmp.So the l3-ecmp-hash-fields is also valid to vxlan ecmp.And the egress port number suported is controlled by "ovs-vsctl set-max-ecmp-ports ",could be 2,4,8,16,32,default value is 4.
Command
ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=pica8_vxlan options:remote_ip=10.10.10.2 options:local_ip=10.10.10.1 options:vnid=1122867 options:udp_dst_port=4789 options:vlan=1 options:src_mac=C8:0A:A9:04:49:1A options:dst_mac=C8:0A:A9:9E:14:A5 options:egress_port=te-1/1/2 options:vlan2=2 options:src_mac2=C8:0A:A9:04:49:1B options:dst_mac2=C8:0A:A9:9E:14:A6 options:egress_port2=te-1/1/3 options:vlan3=3 options:src_mac3=C8:0A:A9:04:49:1C options:dst_mac3=C8:0A:A9:9E:14:A7 options:egress_port3=te-1/1/4
the usage is the same with vxlan.
.
Copyright © 2024 Pica8 Inc. All Rights Reserved.