Linux command: ssh/scp/ping/traceroute/apt-get
- Tracy Yang (Unlicensed)
If management VRF is enabled, and you want to find the next-hop route in management VRF when running the commands traceroute/SCP/ping/apt get/SSH at Linux prompt, that is, using Eth0/1 management interface as the route interface, you have to add ip vrf exec mgmt-vrf before the commands.
The example format of these commands is shown below:
sudo ip vrf exec <mgmt-vrf|vrf-name> traceroute 10.10.51.11
sudo ip vrf exec <mgmt-vrf|vrf-name> scp admin@10.10.51.18:/home/Pica8.pm
sudo ip vrf exec <mgmt-vrf|vrf-name> ping 10.10.51.1
sudo ip vrf exec <mgmt-vrf|vrf-name> apt-get update
sudo ip vrf exec <mgmt-vrf|vrf-name> ssh <ip-address>
ip vrf exec <mgmt-vrf|vrf-name> is added to specify which VRF to run the command in. If not specified, find the next hop routing information from the default VRF.
Copyright © 2024 Pica8 Inc. All Rights Reserved.