IPv6 Management Support
SNMP over IPv6
User can walk the SNMP model via IPv6 address.
SSH over IPv6
User can log in to the switch via IPv6 address. (Static IPv6 address for a management port can be configured.)
admin@XorPlus# set system management-ethernet eth0 ip-address ? Possible completions: <[Enter]> Execute this command IPv4 IPv4 address or negotiated via DHCP, e.g. 192.168.1.2/24 or dhcp IPv6 IPv6 address or negotiated via DHCP, e.g. fec0::10/64 or dhcp admin@XorPlus# set system management-ethernet eth0 ip-gateway ? Possible completions: <[Enter]> Execute this command IPv4 Configure the IPv4 gateway IPv6 Configure the IPv6 gateway
Syslog over IPv6
User can send syslog via IPv6 address to remote server.
admin@XorPlus# set system syslog server-ip ? Possible completions: <IPv4> Remove syslog server <IPv6> Remove syslog server for IPv6
NTP Client IPv6
User can synchronize the time via IPv6 address.
admin@XorPlus# set system ntp-server-ip ? Possible completions: <IPv4> Sync time with NTP server <IP> <IPv6> Sync time with NTP server <IPv6>
DNS Client IPv6
User can configure an IPv6 dns server IP address.
admin@XorPlus# set system dns-server-ip ? Possible completions: <IPv4> DNS server IP address <IP> <IPv6> DNS server IPv6 address <IP>
DHCPv6 Client
PicOS supports dhcpv6 function.
Radius over IPv6
User can configure an IPv6 address for the radius server.
admin@XorPlus# set system aaa radius authorization server-ip ? Possible completions: <IPv4> Radius authorization IPv4 server address <IPv6> Radius authorization IPv6 server address
Copyright © 2024 Pica8 Inc. All Rights Reserved.