set poe power voltage

NOTE:

This command is applied on AS4630-54NPE and AS4630-54PE.

The set poe power voltage command configures PoE power voltage on AS4630-54NPE and AS4630-54PE platforms.

The delete poe power voltage command deletes the configuration.

Command Syntax

set poe power voltage [110v | 220v]

Parameters

Parameter	Description
voltage [110v \| 220v]	Specifies the voltage value. The value could be 110v or 220v.The default value is 110v.

Usage Guidelines

On AS4630-54NPE and AS4630-54PE, PICOS cannot read out the voltage. Users can use command set poe power voltage [110v | 220v] to set PoE power voltage. With different voltage, 110V-120V at low-line or 220V-240V at high-line, each PSDU will give 1000W or 1200W respectively. Accordingly, the switch will allocate different power to PoE with regarding to low-line or high-line. By accounting for the PoE guard band (10%), the PoE available powers are illustrated by below table.

With two PSUs powered on:

With one PSU powered on:

Example

Configure PoE power voltage on AS4630-54NPE or AS4630-54PE.

admin@Xorplus# set poe power voltage 110v
admin@Xorplus# commit

When PoE power mode is redundant, the result of “run show poe power” shows as below:

When PoE power mode is aggressive, the result of “run show poe power” shows as below: