PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.3.3_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.3.3
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
Layer 3 Routing Commands
•
run show neighbors
•
run show route
•
run show route forward-host
•
run show route forward-route
•
run show vrf
•
set ip vrf
•
set ip routing enable
•
set system management-vrf enable
BGP Commands
OSPFv2 Commands
OSPFv3 Command Reference
Static Route Configuration Commands
Route Map Commands
Route Leaking Commands
BGP Route Leaking Commands
Static Route Leaking Commands
•
set protocols static route nexthop-vrf next-hop
•
set protocols static vrf route nexthop-vrf next-hop
BFD Configuration Commands
IP Multicast Commands
Protocol Configuration Commands
•
OpenFlow Commands in CrossFlow Mode
VLAN Configuration Commands
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
MVRP Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.3.3_Configuration_Guide
/
/
Route Leaking Commands
/
Static Route Leaking Commands
Summarize
Static Route Leaking Commands
Tracy Yang (Unlicensed)
Owned by
Tracy Yang (Unlicensed)
Mar 03, 2023
1 min read
Loading data...
set protocols static vrf route nexthop-vrf next-hop
set protocols static route nexthop-vrf next-hop
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 10, "requestCorrelationId": "bcccc05663204eaea84c5744c5d8db77"}