set protocols bfd multihop peer local-address shutdown
The set protocols bfd multihop peer local-address shutdown command can be used to disable the BFD peer. When the peer is disabled an ‘administrative down’ message is sent to the remote peer for a multi-hop BFD session.
The delete protocols bfd multihop peer local-address shutdown command sets the configuration to the default value.
Command Syntax
set protocols bfd multihop [vrf <vrf-name>] peer<peer-ip> local-address <local-ip> shutdown
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
peer <peer-ip> | Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address. |
local-address <local-ip> | Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address. |
Example
Disable the BFD peer.
admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3shutdown
admin@Xorplus# commit