set interface gigabit-ethernet duplex auto

The set interface gigabit-ethernet duplex auto command configures the duplex mode of optical port as auto negotiation mode.

Command Syntax

set interface gigabit-ethernet <interface-name> duplex auto

Parameter

Usage Guidelines

Pay attention to the following notes:

• Currently, duplex mode for optical port is only available for the 10 optical port when its port rate set to 1G.
• Duplex mode for optical port currently only supports to configure as auto, i.e. auto negotiation mode.
• It is required that the duplex mode of the peer 1G optical port is also set to auto negotiation mode, otherwise the port cannot link up.

Use command delete interface gigabit-ethernet <interface-name> duplex to go back to the default duplex mode to full.

 Example

• Set the duplex mode of optical port te-1/1/1 as auto negotiation mode.

admin@Xorplus# set interface gigabit-ethernet te-1/1/1 speed 1000
admin@Xorplus# set interface gigabit-ethernet te-1/1/1 duplex auto