PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.3.3_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
Show more above
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Port Security Commands
IPv6 Neighbor Discovery Protocol Command Reference
Routed Interface
L3 Interface
•
interface aggregate-balancing hash-mapping field ethernet-destination-address disable
Uplink Failure Detection Commands
•
interface aggregate-balancing hash-mapping field ethernet-source-address disable
•
interface aggregate-balancing hash-mapping field ethernet-type disable
•
interface aggregate-balancing hash-mapping field ingress-interface disable
•
interface aggregate-balancing hash-mapping field ip-destination disable
•
interface aggregate-balancing hash-mapping field ip-protocol disable
•
interface aggregate-balancing hash-mapping field ip-source disable
•
interface aggregate-balancing hash-mapping field port-destination disable
•
interface aggregate-balancing hash-mapping field port-source disable
•
interface aggregate-balancing hash-mapping field vlan disable
•
set interface aggregate-ethernet
•
set interface aggregate-ethernet description
•
set interface aggregate-ethernet disable
•
interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
•
set interface aggregate-ethernet aggregated-ether-options lacp
•
interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
•
interface aggregate-ethernet <lag_name> backup-port delay
•
interface aggregate-ethernet <lag_name> backup-port interface
•
interface aggregate-ethernet <lag_name> backup-port mode
•
interface aggregate-ethernet <lag_name> crossflow enable
•
interface aggregate-ethernet <lag_name> crossflow local-control
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
•
interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
•
set interface aggregate-ethernet family ethernet-switching port-mode
•
set interface aggregate-ethernet family ethernet-switching vlan members
•
interface aggregate-ethernet <lag_name> hash-mapping mode
•
interface aggregate-ethernet <lag_name> mtu
•
interface aggregate-ethernet <lag_name> snmp-trap
•
interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
•
interface aggregate-ethernet <lag_name> storm-control <mode> pps
•
set interface bpdu-tunneling destination-mac
•
interface cut-through-mode
•
set interface ecmp hash-mapping field ingress-interface disable
•
set interface ecmp hash-mapping field ip-destination disable
•
set interface ecmp hash-mapping field ip-protocol disable
•
set interface ecmp hash-mapping field ip-source disable
•
set interface ecmp hash-mapping field port-destination disable
•
set interface ecmp hash-mapping field port-source disable
•
set interface ecmp hash-mapping field vlan disable
•
interface ecmp max-path
•
interface ethernet-switching-options buffer queue-limit
•
interface ethernet-switching-options mac-table-aging-time
•
interface gigabit-ethernet <port> backup-port delay
•
interface gigabit-ethernet <port> backup-port interface
•
interface gigabit-ethernet <port> backup-port mode
•
interface gigabit-ethernet <port> crossflow enable
•
interface gigabit-ethernet <port> crossflow local-control
•
interface gigabit-ethernet <port> description
•
interface gigabit-ethernet <port> disable
•
set interface gigabit-ethernet ether-options 802.3ad
•
interface gigabit-ethernet <port> ether-options flow-control
•
set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
•
interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
•
set interface gigabit-ethernet family ethernet-switching port-mode
•
set interface gigabit-ethernet family ethernet-switching vlan members
•
interface gigabit-ethernet <port> mtu
•
interface gigabit-ethernet <port> power-preemphasis-level
•
interface gigabit-ethernet <port> snmp-trap
•
set interface gigabit-ethernet speed
•
set interface gigabit-ethernet auto-speeds
•
interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
•
interface gigabit-ethernet <port> storm-control <mode> pps
•
interface gigabit-ethernet <port> wred queue <value> drop_probability
•
interface gigabit-ethernet <port> wred queue <value> ecn_thresh
•
interface gigabit-ethernet <port> wred queue <value> enable
•
interface gigabit-ethernet <port> wred queue <value> max_thresh
•
interface gigabit-ethernet <port> wred queue <value> min_thresh
•
interface max-acl-rule-limit <egress/ingress>
•
interface max-route-limit
•
show interface aggregate-ethernet <lag_name>
•
show interface aggregate-ethernet <lag_name> dot1q-tunneling
•
show interface bpdu-tunneling
•
show interface brief
•
show interface detail
•
show interface diagnostics optics all
•
show interface flexlink
•
show interface gigabit-ethernet <interface>
•
interface gigabit-ethernet <port> family ethernet-switching vlan members <vlan-id> untagged
•
interface gigabit-ethernet <port> link-fault-signaling ignore-local-fault <boolean>
•
interface gigabit-ethernet <port> link-fault-signaling ignore-remote-fault <boolean>
•
set interface gigabit-ethernet up-mode
•
set interface gigabit-ethernet breakout
•
interface gigabit-ethernet <port> storm-control <mode> ratio <value>
•
set interface gigabit-ethernet fec
•
show interface ecmp max-path
•
interface gigabit-ethernet <port> mac-learning <boolean>
•
interface gigabit-ethernet <port> storm-control <mode> kbps
•
run show interface diagnostics tdr
•
set interface gigabit-ethernet cdr
•
set interface gigabit-ethernet duplex auto
•
set interface aggregate-ethernet aggregated-ether-options lacp fallback enable
•
set interface aggregate-ethernet aggregated-ether-options lacp fallback timeout
•
run show interface port-index-mapping
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
Layer 3 Routing Commands
IP Multicast Commands
Protocol Configuration Commands
•
OpenFlow Commands in CrossFlow Mode
VLAN Configuration Commands
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
MVRP Commands
Show more below
Blogs
You‘re viewing this with anonymous access, so some content might be blocked.
Close