set protocols bgp bfd
- Tracy Yang (Unlicensed)
The set protocols bgp bfd command enables BFD for BGP.
The delete protocols bgp bfd command disables this feature.
Command Syntax
set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} bfd [profile <profile-name>]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <ip> | Specifies the IP address of a peer. |
| peer-group <peer-group> | Specifies a peer group. |
| interface <interface> | Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name. |
profile <profile-name> | Optional. Specifies the profile name. The value is a string. It has to be pre-defined by the command set protocols bfd profile xx. Profile can be used to modify parameters for a BFD session. |
Example
• Enable BFD for BGP.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 bfd admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.