set protocols bfd multihop peer local-address detect-multiplier

The set protocols bfd multihop peer local-address detect-multiplier command configures the detection multiplier to determine packet loss for a multi-hop BFD session.

The delete protocols bfd multihop peer local-address detect-multiplier command sets the configuration to the default value.

Command Syntax

set protocols bfd multihop [vrf <vrf-name>] peer<peer-ip> local-address <local-ip> detect-multiplier <MULTIPLIER>

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
peer <peer-ip>	Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.
local-address <local-ip>	Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address.
detect-multiplier <MULTIPLIER>	Specifies the BFD detection multiplier. The value is an integer that ranges from 2 to 255. The default value is 3.

Usage Guidelines

The remote transmission interval will be multiplied by this value to determine the connection loss detection timer.

Example: when the local system has detect-multiplier 3 and the remote system has transmission interval 300, the local system will detect failures only after 900 milliseconds without receiving packets.

Example

Configure the BFD detection multiplier to 4 for BFD peer 2.2.2.2 for a multi-hop BFD session.

admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3 detect-multiplier 4
admin@Xorplus# commit