set protocols spanning-tree rstp interface path-cost
The set protocols spanning-tree rstp interface path-cost command configures the link path cost of a physical port or a LAG port for RSTP mode.
Command Syntax
set protocols spanning-tree rstp interface <interface-name> path-cost <path-cost>
Parameter
Parameter | Description |
interface <interface-name> | Specifies a port name. The value is a string that can be set to a physical port name or a LAG port. |
path-cost <path-cost> | Specifies the path cost value of the external link. The value is an integer that ranges from 0 to 200000000. The default value is 0. |
Usage Guidelines
Path cost to the root bridge. It is determined by the distance between the port sending the configuration BPDU and the root bridge. Smallest root path cost is used as the root port on a non-root bridge. On the root bridge, the path cost of each port is 0.
Example
- Configure the path cost of port ge-1/1/1 to 500.
admin@Xorplus# set protocols spanning-tree rstp interface ge-1/1/1 path-cost 500 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.