set protocols spanning-tree mstp configuration-name

The set protocols spanning-tree mstp configuration-name command configures the MST region name of the switching device.

Command Syntax

set protocols spanning-tree mstp configuration-name <configuration-name>

Parameter

Usage Guidelines

MST region name is used to distinguish MST regions. Two switching devices belong to the same MST region only when they have the following same configurations:

• MST region name
• Mappings between MSTIs and VLANs
• MST region revision level

Example

• Configure the MSTP bridge configuration name.

admin@Xorplus# set protocols spanning-tree mstp configuration-name mstp1
admin@Xorplus# commit