Physical Ethernet Port Configuration

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023

You can enable (or disable) the Ethernet port, configure the Ethernet port's MTU, rate-limit, flow control and the duplex mode of optical port.

Shutting Down the Ethernet Port

admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 disable true
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring the MTU

admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 mtu 1200
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Enabling Port Flow Control

admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 ether-options flow-control true
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Configuring the Duplex Mode of Optical Port as Auto-negotiation Mode

Notes:

  • Currently, duplex mode for optical port is only available for the 10 optical port when its port rate set to 1G.
  • Duplex mode for optical port currently only supports to configure as auto, i.e. auto-negotiation mode.
admin@Xorplus# set interface gigabit-ethernet te-1/1/1 speed 1000
admin@Xorplus# set interface gigabit-ethernet te-1/1/1 duplex auto
admin@XorPlus# commit 
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

Copyright © 2024 Pica8 Inc. All Rights Reserved.