WRR Configuration Example
- Tracy Yang (Unlicensed)
As shown in Fig 2, ge-1/1/1 and ge-1/1/2 are ingress ports. ge-1/1/3 is the egress port. Use WRR scheduling model: priority trust mode is IEEE 802.1.
Fig 2. Configure WRR
Configure Scheduler
Configure two schedulers: s1 and s2. Their modes are WRR. Configure scheduler s1's weight as 1 and s2's weight as 3.
admin@XorPlus# set class-of-service scheduler s1 mode WRR admin@XorPlus# set class-of-service scheduler s2 mode WRR admin@XorPlus# set class-of-service scheduler s1 weight 1 admin@XorPlus# set class-of-service scheduler s2 weight 3 admin@XorPlus# commit Commit OK. Save done.
Configure Two Forwarding-Classes
Configure forwarding-classes, f1, f2, and their local-priorities.
admin@XorPlus# set class-of-service forwarding-class f1 local-priority 3 admin@XorPlus# set class-of-service forwarding-class f2 local-priority 6 admin@XorPlus# commit Commit OK. Save done.
Configuring Classifiers and Apply Classifiers to Ingress Ports
Configure classifier c1, c2, and the trust mode for each. Configure classifier relevant to the forwarding class. Both c1 and c2 are used as ingress ports, and they should contain code point, not scheduler.
admin@XorPlus# set class-of-service classifier c1 trust-mode ieee-802.1 admin@XorPlus# set class-of-service classifier c1 forwarding-class f1 code-point 5 admin@XorPlus# set class-of-service classifier c2 trust-mode ieee-802.1 admin@XorPlus# set class-of-service classifier c2 forwarding-class f2 code-point 7 admin@XorPlus# commit Commit OK. Save done. admin@XorPlus# set class-of-service interface ge-1/1/1 classifier c1 admin@XorPlus# set class-of-service interface ge-1/1/2 classifier c2 admin@XorPlus# commit Commit OK. Save done. admin@XorPlus# run show class-of-service interface ge-1/1/1 Interface : ge-1/1/1 trust mode : ieee-802.1 Default ieee-802.1 : 0 Default dscp : 0 Default inet-precedence : 0 Local-priority Queue-Schedule Code-points -------------- -------------------------- ------------------------------ 0 SP,0kbps 0 1 SP,0kbps 1 2 SP,0kbps 2 3 SP,0kbps 3,5 4 SP,0kbps 4 5 SP,0kbps 6 SP,0kbps 6 7 SP,0kbps 7 admin@XorPlus# run show class-of-service interface ge-1/1/2 Interface : ge-1/1/2 trust mode : ieee-802.1 Default ieee-802.1 : 0 Default dscp : 0 Default inet-precedence : 0 Local-priority Queue-Schedule Code-points -------------- -------------------------- ------------------------------ 0 SP,0kbps 0 1 SP,0kbps 1 2 SP,0kbps 2 3 SP,0kbps 3 4 SP,0kbps 4 5 SP,0kbps 5 6 SP,0kbps 6,7 7 SP,0kbps
Configuring Scheduler Profile and Apply Scheduler Profile to Egress Ports
Scheduler profile p1 is used for egress port ge-1/1/3 and should contain a scheduler not containing code point.
admin@XorPlus# set class-of-service scheduler-profile p1 forwarding-class f1 scheduler s1 admin@XorPlus# set class-of-service scheduler-profile p1 forwarding-class f2 scheduler s2 admin@XorPlus# commit Commit OK. Save done. admin@XorPlus# set class-of-service interface ge-1/1/3 scheduler-profile p1 admin@XorPlus# commit Commit OK. Save done. admin@XorPlus# run show class-of-service interface ge-1/1/3 Interface : ge-1/1/3 trust mode : no-trust Default ieee-802.1 : 0 Default dscp : 0 Default inet-precedence : 0 Local-priority Queue-Schedule Code-points -------------- -------------------------- ------------------------------ 0 SP,0kbps 1 SP,0kbps 2 SP,0kbps 3 WRR,1,0kbps 4 SP,0kbps 5 SP,0kbps 6 WRR,3,0kbps 7 SP,0kbps
Generate Traffic
PC1 and PC2 generate traffic that are matched with the corresponding classifier. PC1 and PC2 send 100% of traffic to PC3 at the same time.
The expected result is that PC3 can receive packets from PC1 and PC2, and their rate is 1:3, that is the weight proportion in the corresponding queue.
Copyright © 2024 Pica8 Inc. All Rights Reserved.