run show port-security address
The run show port-security address command displays the secure MAC address table entries.
Command Syntax
run show port-security [interface gigabit-ethernet <interface-name>] address
Parameter
Parameter | Description |
gigabit-ethernet <interface-name> | Optional. Specifies a secure interface name. The value is a string.
|
Example
- Run run show port-security address command to view the secure MAC address table entries.
admin@XorPlus# run show port-security address Secure Mac Address Table ----------------------------------------------------- Vlan MAC Address Type Interface ---- ----------------- ------- ---------- 1 00:00:11:11:11:11 dynamic ge-1/1/1 1 00:00:11:11:11:12 dynamic ge-1/1/1 1 00:00:23:23:23:23 static ge-1/1/1 1 00:00:23:23:23:24 static ge-1/1/1 1 00:00:23:23:23:25 static ge-1/1/1 ----------------------------------------------------- MAC age time :300s
- Run run show port-security interface gigabit-ethernet <interface-name> address command to view the secure MAC address table entries on a secure interface.
admin@Xorplus# run show port-security interface gigabit-ethernet ge-1/1/34 address Secure Mac Address Table ----------------------------------------------------- VLAN MAC Address Type Interface ---- ----------------- ------- ---------- 1 00:00:11:11:11:11 dynamic ge-1/1/1 ----------------------------------------------------- MAC age time :300s
Copyright © 2024 Pica8 Inc. All Rights Reserved.