N3208PX-ON

Front Panel Schematic

(1) System Status LED	(2) Power Status LED	(3) FAN Status LED
(4) System Beacon LED	(5) Console port	(6) Management Ethernet port
(7) 4 x 1G RJ45 ports	(8) 4x5G RJ45 ports	(9) 2x10G SPF+ ports
(10) USB port	(11) Reset button	-

Rear Panel Schematic

(1) PSU1

(2) FAN1

-

Switch System Characteristics

Mechanical dimension	Standard 1U chassis height
Management port	1
RJ45 Console port	1
1G RJ45 port	4
5G RJ45 port	4
10G SPF+ port	2
Power LED	1
System Status LED	1
FAN Status LED	1
System Beacon LED	1
USB port	1
Reset button	1
PSU	1
FRU (Fan Removable Unit)	1
Working environment temperature	0ºC～70ºC

*UPoE

The first eight RJ45 ports, from ge-1/1/1 to ge-1/1/8, on the front panel support UPoE. For these UPoE ports, the maximum output power supported is up to 90 watts. For details about UPoE, please refer to UPoE.
See the link PoE Configuration Commands for PoE command reference, the following two PoE commands are not supported on N3208PX-ON:

set poe interface {<interface-name> | all} max-power <integer>

set poe power management-mode <value>

1G/2.5G/5G RJ45 Port

The four 1G/2.5G/5G RJ45 ports, ge-1/1/5, ge-1/1/6, ge-1/1/7 and ge-1/1/8, don’t support setting of the force speed by using set interface gigabit-ethernet<interface-name> speed <speed> command, but only supports auto-negotiation mode. Together with the optional set interface gigabit-ethernet <interface-name> auto-speeds <auto-speed> command, user can manually specify the auto-negotiation rate range.