Zero Touch Provisioning API
- Tracy Yang (Unlicensed)
Pica8 PicOS ZTP (Zero Touch Provisioning) makes use of the API (application programming interface) defined in the ztp-functions.sh file located in the /usr/local/bin directory.
The /usr/local/bin/ztp-functions.sh file is dscribed as API interface for auto-provisioning scripts. The following functions are defined in the ztp-functions.sh file, which can be used in ZTP scripts:
| API | Description | Parameter | Return Value | Supported Version |
|---|---|---|---|---|
| ztp_disable | Disable ZTP auto-run when switch boot up | None | 0 = success, 1 = failed | All |
| ztp_enable | Enable ZTP auto-run when switch boot up | None | 0 = success, 1 = failed | All |
| add_remote_syslog_server <ip-addreAs> | Add remote syslog server | Parameter #1: the IP address of remote syslog server (eg: 192.168.1.200) | 0 = success 1 = failed | All |
| remove_remote_syslog_server <ip-address> | Remove remote syslog server | Parameter #1: the IP address of remote syslog server (eg: 192.168.1.200) | 0 = success, 1 = failed | All |
| picos_config <number> <ip-address> <gateway-ip> | Set the configuration for PicOS service | Parameter #1: the server selected, 1 for PicOS L2/L3, 2 for OVS, 3 for none service Parameter #2: a static IP and netmask for the switch (e.g. 128.0.0.10/24) when parameter #1 is set to 2 Parameter #3: the gateway IP (e.g. 172.168.1.2) when parameter #1 is set to 2 | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_start_stop <action> | The action of PicOS service | Parameter #1: start: start the PicOS service stop: stop the PicOS service restart: restart the PicOS service status: get the status of PicOS service | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_l2l3_start | Start PicOS L2/L3 | None | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_l2l3_restart | Restart PicOS L2/L3 | None | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_l2l3_stop | Stop PicOS L2/L3 | None | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_ovs_start <ip-address> <gateway-ip> | Start PicOS OVS, parameters are needed if PicOS is not set in OVS mode. | Parameter #1: eth0 IP address and netmask (eg: 192.168.0.2/24) Parameter #2:gataway IP (eg: 192.168.1.1) | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_ovs_restart <ip-address> <gateway-ip> | Restart PicOS OVS, parameters are needed if PicOS is not set in OVS mode. | Parameter #1: eth0 IP address and netmask (eg: 192.168.0.2/24) | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| picos_ovs_stop | Stop PicOS L2/L3 | None | 0 = success, 1 = failed | 2.11 and versions before 2.11 |
| tftp_get_file <file-name> <file-name> <ip-address> | Get file from TFTP server | Parameter #1: file name in TFTP server Parameter #2: file name with path in local Parameter #3: TFTP server IP address | 0 = success, 1 = failed | All |
| tftp_get_l2l3_config_file <file-name> <ip-address> | Get PicOS L2/L3 configuration from TFTP server | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address from DHCP server will be used | 0 = success, 1 = failed | All |
| tftp_get_ovs_config_file <file-name> <ip-address> | Get PicOS OVS configuration file | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address from DHCP server will be used | 0 = success, 1 = failed | All |
| tftp_get_picos_config_file <file-name> <ip-address> | Get PicOS configuration file from TFTP server | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address from DHCP server will be used | 0 = success, 1 = failed | All |
| tftp_get_picos_image <file-name> <ip-address> | Get PicOS image from TFTP server | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address got from DHCP server will be used | 0 = success, 1 = failed | All |
| tftp_get_pica_image <file-name> <ip-address> | Get Pica Image from TFTP server | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address from DHCP server will be used | 0 = success, 1 = failed | All |
| l2l3_cmd_shell <commands> | Run an CLI command of PicOS L2/L3 | Parameter #1: linux shell command(s) | 0 = success, 1 = failed | All |
| l2l3_load_config <file-name> <ip-address> | Get a file with PicOS L2/L3 CLI commands list, and execute these commands. | Parameter #1: configuration file name with path on TFTP sever Parameter #2: server IP address, if not set, the TFTP server IP address got from DHCP server will be used | 0 = success, 1 = failed | All |
| ovs_cmd_shell <commands> | Run an OVS command | Parameter #1: linux shell command(s) | 0 = success, 1 = failed | All |
| ovs_load_config <ip-address> <gateway-ip> <file-name> <ip-address> | Get a file with PicOS OVS commands list, and execute these commands. | Parameter #1: if PicOS is not set to OVS, then it should be eth0 IP address and netmask, 192.168.0.2/24, otherwise “ ” Parameter #2: if PicOS is not set to OVS, then gateway IP, otherwise “ ” Parameter #3: file name with path on TFTP server Parameter #4: server IP address, if not set, the TFTP server IP address from DHCP server will be used | N/A | All |
Copyright © 2024 Pica8 Inc. All Rights Reserved.