Default Settings for CoPP
NOTE:
|
Default Queue Mapping Policy
By default, CoPP provides 27 CPU queues for data forwarding that would have a default scheduling weight. The system pre-defines 16 types of control plane protocols mapping from queue 8 to 26. The default queue mapping policy is as follows.
Table 1. Default Queue Mapping Policy
Protocols | CPU Queue | Default Scheduling Weight |
RIPng | 26 | 16 |
ERPS | 25 | 32 |
MVRP | 24 | 32 |
SSH/SNMP/NTP/TACACS/RADIUS | 23 | 12 |
BPDU | 22 | 32 |
LACP | 21 | 32 |
LLDP | 20 | 32 |
ARP | 19 | 32 |
NDP | 18 | 32 |
BFD | 17 | 16 |
MLAG | 16 | 16 |
MLAG-MAC-SYNC | 15 | 16 |
BGP | 14 | 16 |
OSPF | 13 | 16 |
RIP | 12 | 16 |
DHCP | 11 | 16 |
VRRP | 10 | 16 |
IGMP | 9 | 16 |
PIM | 8 | 16 |
Reserved | 7 | - |
Reserved | 6 | - |
Reserved | 5 | - |
Reserved | 4 | - |
Reserved | 3 | - |
Reserved | 2 | - |
Reserved | 1 | - |
Default* | 0 | 0 |
Reserved: Reserved CPU queues indicate the CPU queues that have not been used by the system pre-defined queue mapping settings. For user-defined CoPP policy, it is recommended to use the reserved queues for queue mapping settings.
Default*: The flow of traffic directed to switch CPU will be sent to CPU queue 0 when the traffic matches no firewall filter rule.
But for the packet with an Inet Precedence or DSCP value, it will not always be sent to CPU queue 0 when the traffic matches no firewall filter rule. When you configure the classifier to classify services on different inbound interfaces by using set class-of-service classifier trust-mode dscp and set class-of-service interface classifier commands. The packets will be sent to the CPU queue according to the Inet Precedence or DSCP value. Mappings from Inet Precedence/DSCP value to CPU Queue are shown in the following tables.
Table 2. Mapping from Inet Precedence value to CPU Queue
Inet-precedence | CPU Queue |
0 | 0 |
1 | 1 |
2 | 2 |
3 | 3 |
4 | 4 |
5 | 5 |
6 | 6 |
7 | 7 |
Table 3. Mapping from DSCP value to CPU Queue
DSCP | CPU Queue |
0,1,2,3,4,5,6,7 | 0 |
8,9,10,11,12,13,14,15 | 1 |
16,17,18,19,20,21,22,23 | 2 |
24,25,26,27,28,29,30,31 | 3 |
32,33,34,35,36,37,38,39 | 4 |
40,41,42,43,44,45,46,47 | 5 |
48,49,50,51,52,53,54,55 | 6 |
56,57,58,59,60,61,62,63 | 7 |
Default CLI Settings
PicOS will startup with the following CLI commands by default. Users can change the pre-defined CoPP policies but are NOT allowed to delete them.
NOTE: The values of min-bandwidth-pps and max-bandwidth-pps are different on different platforms.
# Default configurations of forwarding class for CoPP.
set class-of-service forwarding-class ripng-class local-priority 26 set class-of-service forwarding-class erps-class local-priority 25 set class-of-service forwarding-class mvrp-class local-priority 24 set class-of-service forwarding-class management-class local-priority 23 set class-of-service forwarding-class bpdu-class local-priority 22 set class-of-service forwarding-class lacp-class local-priority 21 set class-of-service forwarding-class lldp-class local-priority 20 set class-of-service forwarding-class arp-class local-priority 19 set class-of-service forwarding-class ndp-class local-priority 18 set class-of-service forwarding-class bfd-class local-priority 17 set class-of-service forwarding-class mlag-class local-priority 16 set class-of-service forwarding-class mlag-mac-sync-class local-priority 15 set class-of-service forwarding-class bgp-class local-priority 14 set class-of-service forwarding-class ospf-class local-priority 13 set class-of-service forwarding-class rip-class local-priority 12 set class-of-service forwarding-class dhcp-class local-priority 11 set class-of-service forwarding-class vrrp-class local-priority 10 set class-of-service forwarding-class igmp-class local-priority 9 set class-of-service forwarding-class pim-class local-priority 8 set class-of-service forwarding-class default-class local-priority 0
# Default configurations of schedulers for CoPP.
set class-of-service scheduler ripng-scheduler mode WRR set class-of-service scheduler ripng-scheduler weight 16 set class-of-service scheduler ripng-scheduler max-bandwidth-pps 80 set class-of-service scheduler ripng-scheduler min-bandwidth-pps 0 set class-of-service scheduler erps-scheduler mode WRR set class-of-service scheduler erps-scheduler weight 32 set class-of-service scheduler erps-scheduler max-bandwidth-pps 80 set class-of-service scheduler erps-scheduler min-bandwidth-pps 20 set class-of-service scheduler mvrp-scheduler mode WRR set class-of-service scheduler mvrp-scheduler weight 32 set class-of-service scheduler mvrp-scheduler max-bandwidth-pps 80 set class-of-service scheduler mvrp-scheduler min-bandwidth-pps 20 set class-of-service scheduler management-scheduler mode WRR set class-of-service scheduler management-scheduler weight 12 set class-of-service scheduler management-scheduler max-bandwidth-pps 80 set class-of-service scheduler management-scheduler min-bandwidth-pps 0 set class-of-service scheduler arp-scheduler mode WRR set class-of-service scheduler arp-scheduler weight 32 set class-of-service scheduler arp-scheduler max-bandwidth-pps 80 set class-of-service scheduler arp-scheduler min-bandwidth-pps 0 set class-of-service scheduler ndp-scheduler mode WRR set class-of-service scheduler ndp-scheduler weight 32 set class-of-service scheduler ndp-scheduler max-bandwidth-pps 80 set class-of-service scheduler ndp-scheduler min-bandwidth-pps 0 set class-of-service scheduler bfd-scheduler mode WRR set class-of-service scheduler bfd-scheduler weight 16 set class-of-service scheduler bfd-scheduler max-bandwidth-pps 80 set class-of-service scheduler bfd-scheduler min-bandwidth-pps 20 set class-of-service scheduler mlag-scheduler mode WRR set class-of-service scheduler mlag-scheduler weight 16 set class-of-service scheduler mlag-scheduler max-bandwidth-pps 80 set class-of-service scheduler mlag-scheduler min-bandwidth-pps 20 set class-of-service scheduler mlag-mac-sync-scheduler mode WRR set class-of-service scheduler mlag-mac-sync-scheduler weight 16 set class-of-service scheduler mlag-mac-sync-scheduler max-bandwidth-pps 80 set class-of-service scheduler mlag-mac-sync-scheduler min-bandwidth-pps 20 set class-of-service scheduler bgp-scheduler mode WRR set class-of-service scheduler bgp-scheduler weight 16 set class-of-service scheduler bgp-scheduler max-bandwidth-pps 80 set class-of-service scheduler bgp-scheduler min-bandwidth-pps 20 set class-of-service scheduler ospf-scheduler mode WRR set class-of-service scheduler ospf-scheduler weight 16 set class-of-service scheduler ospf-scheduler max-bandwidth-pps 80 set class-of-service scheduler ospf-scheduler min-bandwidth-pps 20 set class-of-service scheduler rip-scheduler mode WRR set class-of-service scheduler rip-scheduler weight 16 set class-of-service scheduler rip-scheduler max-bandwidth-pps 80 set class-of-service scheduler rip-scheduler min-bandwidth-pps 20 set class-of-service scheduler dhcp-scheduler mode WRR set class-of-service scheduler dhcp-scheduler weight 16 set class-of-service scheduler dhcp-scheduler max-bandwidth-pps 80 set class-of-service scheduler dhcp-scheduler min-bandwidth-pps 20 set class-of-service scheduler vrrp-scheduler mode WRR set class-of-service scheduler vrrp-scheduler weight 16 set class-of-service scheduler vrrp-scheduler max-bandwidth-pps 80 set class-of-service scheduler vrrp-scheduler min-bandwidth-pps 20 set class-of-service scheduler igmp-scheduler mode WRR set class-of-service scheduler igmp-scheduler weight 16 set class-of-service scheduler igmp-scheduler max-bandwidth-pps 80 set class-of-service scheduler igmp-scheduler min-bandwidth-pps 20 set class-of-service scheduler pim-scheduler mode WRR set class-of-service scheduler pim-scheduler weight 16 set class-of-service scheduler pim-scheduler max-bandwidth-pps 80 set class-of-service scheduler pim-scheduler min-bandwidth-pps 20 set class-of-service scheduler bpdu-scheduler mode WRR set class-of-service scheduler bpdu-scheduler weight 32 set class-of-service scheduler bpdu-scheduler max-bandwidth-pps 80 set class-of-service scheduler bpdu-scheduler min-bandwidth-pps 20 set class-of-service scheduler lacp-scheduler mode WRR set class-of-service scheduler lacp-scheduler weight 32 set class-of-service scheduler lacp-scheduler max-bandwidth-pps 80 set class-of-service scheduler lacp-scheduler min-bandwidth-pps 20 set class-of-service scheduler lldp-scheduler mode WRR set class-of-service scheduler lldp-scheduler weight 32 set class-of-service scheduler lldp-scheduler max-bandwidth-pps 80 set class-of-service scheduler lldp-scheduler min-bandwidth-pps 20 set class-of-service scheduler default-scheduler mode WRR set class-of-service scheduler default-scheduler weight 8 set class-of-service scheduler default-scheduler max-bandwidth-pps 80 set class-of-service scheduler default-scheduler min-bandwidth-pps 0 set class-of-service scheduler-profile copp-profile forwarding-class ripng-class scheduler ripng-scheduler set class-of-service scheduler-profile copp-profile forwarding-class erps-class scheduler erps-scheduler set class-of-service scheduler-profile copp-profile forwarding-class mvrp-class scheduler mvrp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class management-class scheduler management-scheduler set class-of-service scheduler-profile copp-profile forwarding-class bpdu-class scheduler bpdu-scheduler set class-of-service scheduler-profile copp-profile forwarding-class lacp-class scheduler lacp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class lldp-class scheduler lldp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class bfd-class scheduler bfd-scheduler set class-of-service scheduler-profile copp-profile forwarding-class mlag-class scheduler mlag-scheduler set class-of-service scheduler-profile copp-profile forwarding-class mlag-mac-sync-class scheduler mlag-mac-sync-scheduler set class-of-service scheduler-profile copp-profile forwarding-class bgp-class scheduler bgp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class ospf-class scheduler ospf-scheduler set class-of-service scheduler-profile copp-profile forwarding-class rip-class scheduler rip-scheduler set class-of-service scheduler-profile copp-profile forwarding-class dhcp-class scheduler dhcp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class vrrp-class scheduler vrrp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class igmp-class scheduler igmp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class pim-class scheduler pim-scheduler set class-of-service scheduler-profile copp-profile forwarding-class arp-class scheduler arp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class ndp-class scheduler ndp-scheduler set class-of-service scheduler-profile copp-profile forwarding-class default-class scheduler default-scheduler
# Apply schedulers of CoPP to inbound interface.
set class-of-service interface inbound-control-plane scheduler-profile copp-profile
# Default configurations of protocol sequences and forwarding class.
set firewall filter copp sequence 10 from protocol bpdu set firewall filter copp sequence 10 then forwarding-class bpdu-class set firewall filter copp sequence 20 from protocol lacp set firewall filter copp sequence 20 then forwarding-class lacp-class set firewall filter copp sequence 30 from protocol lldp set firewall filter copp sequence 30 then forwarding-class lldp-class set firewall filter copp sequence 40 from protocol arp set firewall filter copp sequence 40 then forwarding-class arp-class set firewall filter copp sequence 50 from protocol ndp set firewall filter copp sequence 50 then forwarding-class ndp-class set firewall filter copp sequence 60 from protocol bfd set firewall filter copp sequence 60 then forwarding-class bfd-class set firewall filter copp sequence 70 from protocol mlag set firewall filter copp sequence 70 then forwarding-class mlag-class set firewall filter copp sequence 80 from protocol mlag-mac-sync set firewall filter copp sequence 80 then forwarding-class mlag-mac-sync-class set firewall filter copp sequence 90 from protocol bgp set firewall filter copp sequence 90 then forwarding-class bgp-class set firewall filter copp sequence 100 from protocol ospf set firewall filter copp sequence 100 then forwarding-class ospf-class set firewall filter copp sequence 110 from protocol rip set firewall filter copp sequence 110 then forwarding-class rip-class set firewall filter copp sequence 120 from protocol dhcp set firewall filter copp sequence 120 then forwarding-class dhcp-class set firewall filter copp sequence 130 from protocol vrrp set firewall filter copp sequence 130 then forwarding-class vrrp-class set firewall filter copp sequence 140 from protocol igmp set firewall filter copp sequence 140 then forwarding-class igmp-class set firewall filter copp sequence 150 from protocol pim set firewall filter copp sequence 150 then forwarding-class pim-class set firewall filter copp sequence 160 from protocol ssh set firewall filter copp sequence 160 then forwarding-class management-class set firewall filter copp sequence 170 from protocol snmp set firewall filter copp sequence 170 then forwarding-class management-class set firewall filter copp sequence 180 from protocol ntp set firewall filter copp sequence 180 then forwarding-class management-class set firewall filter copp sequence 190 from protocol tacacs set firewall filter copp sequence 190 then forwarding-class management-class set firewall filter copp sequence 200 from protocol radius set firewall filter copp sequence 200 then forwarding-class management-class set firewall filter copp sequence 210 from protocol mvrp set firewall filter copp sequence 210 then forwarding-class mvrp-class set firewall filter copp sequence 220 from protocol erps set firewall filter copp sequence 220 then forwarding-class erps-class set firewall filter copp sequence 230 from protocol ripng set firewall filter copp sequence 230 then forwarding-class ripng-class
#Apply firewall filter of CoPP to inbound interface.
set firewall filter copp input interface inbound-control-plane
Show Default Settings of CoPP
- You can use run show copp bandwidth, run show class-of-service interface inbound-control-plane and run show filter copp commands to view the default settings. (Besides default settings, the commands will also show the COPP configurations made by the user.)
admin@Xorplus# run show copp bandwidth Forwarding Class Min-Bandwidth Max-Bandwidth Weight Local-Priority Schedule-Mode default-class 0 80 8 0 WRR pim-class 0 80 16 8 WRR igmp-class 0 80 16 9 WRR vrrp-class 0 80 16 10 WRR dhcp-class 0 80 16 11 WRR rip-class 0 80 16 12 WRR ospf-class 0 80 16 13 WRR bgp-class 0 80 16 14 WRR mlag-mac-sync-class 0 80 16 15 WRR mlag-class 0 80 16 16 WRR bfd-class 0 80 16 17 WRR arp-class 20 80 32 18 WRR arp-class 20 80 32 19 WRR lldp-class 20 80 32 20 WRR lacp-class 20 80 32 21 WRR bpdu-class 20 80 32 22 WRR management-class 20 80 12 23 WRR mvrp-class 100 500 32 24 WRR erps-class 100 500 32 25 WRR ripng-class 0 500 16 26 WRR
admin@XorPlus# run show filter copp Filter: copp Description: Sequence: 10 Description: match counter: 0 packets match-condition: protocol: bpdu action: forward forwarding_class: bpdu-class Sequence: 20 Description: match counter: 0 packets match-condition: protocol: lacp action: forward forwarding_class: lacp-class Sequence: 30 Description: match counter: 0 packets match-condition: protocol: lldp action: forward forwarding_class: lldp-class Sequence: 40 Description: match counter: 0 packets match-condition: protocol: arp action: forward forwarding_class: arp-class Sequence: 50 Description: match counter: 0 packets match-condition: protocol: ndp action: forward forwarding_class: ndp-class Sequence: 60 Description: match counter: 0 packets match-condition: protocol: bfd action: forward forwarding_class: bfd-class Sequence: 70 Description: match counter: 0 packets match-condition: protocol: mlag action: forward forwarding_class: mlag-class Sequence: 80 Description: match counter: 0 packets match-condition: protocol: mlag-mac-sync action: forward forwarding_class: mlag-mac-sync-class Sequence: 90 Description: match counter: 0 packets match-condition: protocol: bgp action: forward forwarding_class: bgp-class Sequence: 100 Description: match counter: 0 packets match-condition: protocol: ospf action: forward forwarding_class: ospf-class Sequence: 110 Description: match counter: 0 packets match-condition: protocol: rip action: forward forwarding_class: rip-class Sequence: 120 Description: match counter: 0 packets match-condition: protocol: dhcp action: forward forwarding_class: dhcp-class Sequence: 130 Description: match counter: 0 packets match-condition: protocol: vrrp action: forward forwarding_class: vrrp-class Sequence: 140 Description: match counter: 0 packets match-condition: protocol: igmp action: forward forwarding_class: igmp-class Sequence: 150 Description: match counter: 0 packets match-condition: protocol: pim action: forward forwarding_class: pim-class Sequence: 160 Description: match counter: 0 packets match-condition: protocol: ssh action: forward forwarding_class: management-class Sequence: 170 Description: match counter: 0 packets match-condition: protocol: snmp action: forward forwarding_class: management-class Sequence: 180 Description: match counter: 0 packets match-condition: protocol: ntp action: forward forwarding_class: management-class Sequence: 190 Description: match counter: 0 packets match-condition: protocol: tacacs action: forward forwarding_class: management-class Sequence: 200 Description: match counter: 0 packets match-condition: protocol: radius action: forward forwarding_class: management-class Sequence: 210 Description: match counter: 0 packets match-condition: protocol: mvrp action: forward forwarding_class: mvrp-class Sequence: 220 Description: match counter: 69379 packets match-condition: protocol: erps action: forward forwarding_class: erps-class Sequence: 230 Description: match counter: 0 packets match-condition: protocol: ripng action: forward forwarding_class: ripng-class Input interface: inbound-control-plane
admin@Xorplus# run show class-of-service interface inbound-control-plane Interface : inbound-control-plane Scheduler-profile : copp-profile Forwarding-class Local-priority Scheduler Min-Bandwidth Max-Bandwidth Weight Schedule-Mode ------------------ -------------- --------------------- ------------- ------------- ------ ------------- default-class 0 default-scheduler 0 80 8 WRR pim-class 8 pim-scheduler 0 80 16 WRR igmp-class 9 igmp-scheduler 0 80 16 WRR vrrp-class 10 vrrp-scheduler 0 80 16 WRR dhcp-class 11 dhcp-scheduler 0 80 16 WRR rip-class 12 rip-scheduler 0 80 16 WRR ospf-class 13 ospf-scheduler 0 80 16 WRR bgp-class 14 bgp-scheduler 0 80 16 WRR mlag-mac-sync-class 15 mlag-mac-sync-scheduler 0 80 16 WRR mlag-class 16 mlag-scheduler 0 80 16 WRR bfd-class 17 bfd-scheduler 0 80 16 WRR ndp-class 18 arp-scheduler 20 80 32 WRR arp-class 19 arp-scheduler 20 80 32 WRR lldp-class 20 lldp-scheduler 20 80 32 WRR lacp-class 21 lacp-scheduler 20 80 32 WRR bpdu-class 22 bpdu-scheduler 20 80 32 WRR management-class 23 management-scheduler 20 80 12 WRR mvrp-class 24 mvrp-scheduler 20 80 32 WRR erps-class 25 erps-scheduler 20 80 32 WRR ripng-class 26 ripng-scheduler 0 80 16 WRR
Copyright © 2024 Pica8 Inc. All Rights Reserved.