VXLAN Commands
- Tracy Yang
Owned by Tracy Yang
Nov 13, 2023
1 min read
Loading data...
- vxlans source-interface address
- vxlans udp-port
- set vxlans vni <text> decapsulation mode
- vxlans vni <text> encapsulation mode
- vxlans vni <text> encapsulation vlan
- vxlans vni <text> flood vtep
- vxlans vni <text> flood vtep <ipv4-addr> mac-address
- vxlans vni <text> flood vtep <ipv4-addr> traffic-type
- set vxlans vni vlan
- set vxlans tunnel-mac-leaning disable
- OVSDB VTEP command
- set protocols ovsdb controller <controller-name> address
- set protocols ovsdb controller <controller-name> inactivity-probe-duration 30000
- set protocols ovsdb controller <controller-name> maximum-backoff-duration
- set protocols ovsdb controller <controller-name> port
- set protocols ovsdb controller c1 protocol
- set protocols ovsdb interface
- set protocols ovsdb management-ip
- set protocols ovsdb ssl bootstrap
- set protocols ovsdb ssl ca-cert
- set protocols ovsdb ssl private-key
- set vxlans ovsdb-managed
- set protocols ovsdb controller vrf mgmt-vrf
- set vxlans l3-vni prefix-routes-only
- set vxlans l3-vni
- set vxlans vni mcast-group
- run show vxlan statistics
- run clear vxlan statistics
- run show vxlan vni
- run show vxlan address-table
Copyright © 2024 Pica8 Inc. All Rights Reserved.