VLAN Configuration Commands
This section contains descriptions of the CLI commands that this chapter references.
- set vlans dot1q-tunneling egress from
- set vlans dot1q-tunneling egress then action
- set vlans dot1q-tunneling egress then service-vlan
- set vlans dot1q-tunneling ingress from double-tag service-vlan
- set vlans dot1q-tunneling ingress from one-tag customer-vlan-list
- set vlans dot1q-tunneling ingress from untag enabled
- set vlans dot1q-tunneling ingress then
- set vlans vlan-id
- set vlans vlan-id description
- set vlans vlan-id l3-interface
- set vlans vlan-id vlan-name
- set vlans vlan-id private-vlan mode
- set vlans vlan-id private-vlan association
- set mac-map mac-address vlan
- run show vlans
- run show vlans private-vlan
- run show vlans private-vlan type
- run show mac-map
- set tracemac disable
- tracemac
Copyright © 2024 Pica8 Inc. All Rights Reserved.