set protocols snmp rmon statistics interface

The set protocols snmp rmon statistics interface command configures RMON ethernet statistics on a specified interface. After the statistics table entry is configured under the specified interface, the system continuously gathers statistics for the number of messages on the interface.

The delete protocols snmp rmon statistics command deletes the configuration. Users need to delete the RMON ethernet statistics entry to remove this configuration.

Command Syntax

set protocols snmp rmon statistics <entry-index> interface <interface-name>

delete protocols snmp rmon statistics <entry-index>

Parameters

Parameter	Description
statistics <entry-index>	Specifies the RMON ethernet statistics table index. The value is an integer that ranges from 1 to 255.
interface <interface-name>	Specifies the interface for RMON ethernet statistics. The value could be a physical interface or LAG interface.

Example

Configure RMON ethernet statistics on interface ge-1/1/1.

admin@PICOS# set protocols snmp rmon statistics 1 interface ge-1/1/1
admin@PICOS# commit