run show rmon alarms


The run show rmon alarms command is used to view RMON alarms information.


Command Syntax

run show rmon alarms [<entry-index>]


Parameter

Parameter

Description

[<entry-index>]

Optional. Specifies the RMON alarms table index. The value is an integer that ranges from 1 to 65535.


Example

  • View RMON alarms information.
admin@PICOS# run show rmon alarms
Entry 1 is active, and owned by monitor
    Monitors 1.3.6.1.2.1.16.1.1.1.4.1 every 10 seconds
    Taking absolute samples, last value was 369804
    Rising threshold is 1000000000, assigned to event 1
    Falling threshold is 1000000000, assigned to event 1
    On startup enable rising or falling alarm

Copyright © 2024 Pica8 Inc. All Rights Reserved.