set l3-interface vlan-interface ipv6-nd prefix router-address

Run the command set l3-interface vlan-interface ipv6-nd prefix router-address to set the R flag to indicate to hosts on local link that the specified prefix contains a complete IP address. This flag is not set by default which means hosts do not assume a complete IP address is placed.

Run the command delete l3-interface vlan-interface ipv6-nd prefix router-address to unset this flag.

Command Syntax

set l3-interface vlan-interface <vlan-interface> ipv6-nd prefix <IPv6 Prefix> router-address

set l3-interface vlan-interface <vlan-interface> ipv6-nd prefix <IPv6 Prefix> router-address

Parameters

Example

• This example sets the R flag for the given prefix.

admin@XorPlus# set l3-interface vlan-interface vlan4001 ipv6-nd prefix fa00::0/64 router-address
admin@XorPlus# commit