set interface aggregate-ethernet routed-interface enable

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set interface aggregate-ethernet routed-interface enable command enables a LAG port as a layer 3 routed interface. LAG ports are layer 2 interfaces by default.

The delete interface aggregate-ethernet routed-interface enable command restores the LAG port to a layer 2 interface.


Command Syntax

set interface aggregate-ethernet <lag-name> routed-interface enable <true | false>


Parameter

Parameter

Description

aggregate-ethernet <lag-name>

Specifies the name of a LAG port. The value is like ae1, ae10, etc.

enable <true | false>

Enables or disables the LAG port as a layer 3 routed interface. The value could be true or false.

  • true: Enables the LAG port as a layer 3 routed interface.
  • false: Disables the LAG port as a layer 3 routed interface.

All LAG ports are layer 2 interfaces by default.


Example

  • Enable the LAG port ae3 as a layer 3 routed interface.
admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface enable true
admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface name rif-ae3
admin@Xorplus# commit



Copyright © 2024 Pica8 Inc. All Rights Reserved.