System LED Definition
Feature | Detailed Description | Comment |
System LED | - Solid green – All OK, CLI prompt available
- Blinking green – Boot-up in progress
- Solid yellow – Major Fault. Displays summary of all major faults within the system; the faults are traffic affecting.
- Blinking yellow – Minor Fault: Displays summary of all minor faults within the system; the faults are not traffic affecting.
| At front |
FAN LED | - Solid green –fan powered and @expected rpm
- Solid yellow –fan failed including incompatible airflow direction from what is indicated in the Board ID for the particular SKU.
| At front |
PSU LED | - Solid green – The DC output is on and OK.
- Solid yellow– Power supply critical event causing a shutdown; failure, OCP, OVP, Fan Fail, OTP, UVP.
- Blinking yellow–Power supply warning events where the power supply continues to operate; high temp (PMBus reading inlet > 60deg; PMBus reading hotspot > 100deg), high power, high current (105 %*), slow fan.
| At rear |
Power LED | - Off - No power
- Solid Yellow - POST in progress
- Solid Green - Normal Operation (dual or single supply)
- Blinking Yellow - One of Power Supplier is failed
| At front |
LOCATOR LED | Not supported. | At front |
Port LED Definition
SFP+ port LEDs
Feature | Detailed Description |
Link LED | - Off – No Link
- Solid green – Link on 10G speed
- Solid amber – Link on 1G speed
|
Activity LED | - Off – No Link
- Blinking green – Transmit/Receive is activity
|
QSFP+ port LEDs
Feature | Detailed Description |
Link/ACT LED | - Off – No Link
- Solid green – Link on 40G speed
- Solid Amber- Link on 10G speed
- Blinking green – 40G speed, transmit/Receive is activity
- Blinking amber – 10G speed, transmit/Receive is activity
|
Front Management Ethernet port LEDs
Feature | Detailed Description |
Link LED | - Off – No Link
- Solid green – Link on 1G speed
- Solid yellow – Link on 10M/100M speed
|
Activity LED | - Off – No Link
- Blinking green – Transmit/Receive is activity
|