Installing GCC on PicOS

NOTE:

If the FTP server is connected via the Eth0/1 port, you need to add the string sudo ip vrf exec mgmt-vrf before the apt-get command when executing the apt-get operation.

For example:

admin@Xorplus:~$ sudo ip vrf exec mgmt-vrf apt-get update

If sudo ip vrf exec mgmt-vrf is not added, find the next hop routing information from the default VRF. For the usage of VRF, refer to the VRF configuration guide.

Updating the software list on the source server

admin@XorPlus$sudo apt-get update
Hit http://ftp.tw.debian.org stable Release.gpg
Hit http://ftp.tw.debian.org stable Release
Hit http://ftp.tw.debian.org stable/main powerpc Packages
Hit http://ftp.tw.debian.org stable/main Translation-en
Reading package lists... Done
admin@XorPlus$

Installing new software

admin@XorPlus$sudo apt-get install make
Reading package lists... Done
Building dependency tree 
Reading state information... Done
Suggested packages:
make-doc
The following NEW packages will be installed:
make
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 399 kB of archives.
After this operation, 1165 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
make
Authentication warning overridden.
Get:1 http://ftp.tw.debian.org/debian/ stable/main make powerpc 3.81-8.2 [399 kB]
Fetched 399 kB in 6s (64.1 kB/s) 
Selecting previously unselected package make.
(Reading database ... 16155 files and directories currently installed.)
Unpacking make (from .../make_3.81-8.2_powerpc.deb) ...
Processing triggers for man-db ...
fopen: Permission denied
Setting up make (3.81-8.2) ...
admin@XorPlus$ 
admin@XorPlus$sudo apt-get install python
Reading package lists... Done
Building dependency tree 
Reading state information... Done
The following extra packages will be installed:
file libexpat1 libmagic1 mime-support python-minimal python2.7 python2.7-minimal
Suggested packages:
python-doc python-tk python2.7-doc binutils binfmt-support
The following NEW packages will be installed:
file libexpat1 libmagic1 mime-support python python-minimal python2.7 python2.7-minimal
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 5045 kB of archives.
After this operation, 18.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
WARNING: The following packages cannot be authenticated!
libmagic1 libexpat1 file mime-support python2.7-minimal python2.7 python-minimal python
Authentication warning overridden.
Get:1 http://ftp.tw.debian.org/debian/ stable/main libmagic1 powerpc 5.11-2 [201 kB]
Get:2 http://ftp.tw.debian.org/debian/ stable/main libexpat1 powerpc 2.1.0-1 [142 kB]
Get:3 http://ftp.tw.debian.org/debian/ stable/main file powerpc 5.11-2 [51.7 kB]
Get:4 http://ftp.tw.debian.org/debian/ stable/main mime-support all 3.52-1 [35.5 kB]
Get:5 http://ftp.tw.debian.org/debian/ stable/main python2.7-minimal powerpc 2.7.3-6 [1753 kB]
Get:6 http://ftp.tw.debian.org/debian/ stable/main python2.7 powerpc 2.7.3-6 [2639 kB] 
Get:7 http://ftp.tw.debian.org/debian/ stable/main python-minimal all 2.7.3-4 [42.6 kB] 
Get:8 http://ftp.tw.debian.org/debian/ stable/main python all 2.7.3-4 [180 kB] 
Fetched 5045 kB in 18s (267 kB/s) 
Selecting previously unselected package libmagic1:powerpc.
(Reading database ... 16189 files and directories currently installed.)
Unpacking libmagic1:powerpc (from .../libmagic1_5.11-2_powerpc.deb) ...
Selecting previously unselected package libexpat1:powerpc.
Unpacking libexpat1:powerpc (from .../libexpat1_2.1.0-1_powerpc.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../file_5.11-2_powerpc.deb) ...
Selecting previously unselected package mime-support.
Unpacking mime-support (from .../mime-support_3.52-1_all.deb) ...
Selecting previously unselected package python2.7-minimal.
Unpacking python2.7-minimal (from .../python2.7-minimal_2.7.3-6_powerpc.deb) ...
Selecting previously unselected package python2.7.
Unpacking python2.7 (from .../python2.7_2.7.3-6_powerpc.deb) ...
Selecting previously unselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.7.3-4_all.deb) ...
Selecting previously unselected package python.
Unpacking python (from .../python_2.7.3-4_all.deb) ...
Processing triggers for man-db ...
fopen: Permission denied
Setting up libmagic1:powerpc (5.11-2) ...
Setting up libexpat1:powerpc (2.1.0-1) ...
Setting up file (5.11-2) ...
Setting up mime-support (3.52-1) ...
Setting up python2.7-minimal (2.7.3-6) ...
Linking and byte-compiling packages for runtime python2.7...
Setting up python2.7 (2.7.3-6) ...
Setting up python-minimal (2.7.3-4) ...
Setting up python (2.7.3-4) ...
admin@XorPlus$ 
admin@XorPlus$sudo apt-get install g++
Reading package lists... Done
Building dependency tree 
Reading state information... Done
The following extra packages will be installed:
g+-4.6 libstdc+6-4.6-dev
Suggested packages:
g+-multilib g-4.6-multilib gcc-4.6-doc libstdc6-4.6-dbg libstdc+6-4.6-doc
The following NEW packages will be installed:
g++ g+-4.6 libstdc+6-4.6-dev
0 upgraded, 3 newly installed, 0 to remove and 17 not upgraded.
Need to get 0 B/8383 kB of archives.
After this operation, 24.4 MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
WARNING: The following packages cannot be authenticated!
libstdc+6-4.6-dev g-4.6 g+
Authentication warning overridden.
Selecting previously unselected package libstdc++6-4.6-dev.
(Reading database ... 19555 files and directories currently installed.)
Unpacking libstdc+6-4.6-dev (from .../libstdc+6-4.6-dev_4.6.3-14_powerpc.deb) ...
Selecting previously unselected package g++-4.6.
Unpacking g+-4.6 (from .../g+-4.6_4.6.3-14_powerpc.deb) ...
Selecting previously unselected package g++.
Unpacking g++ (from .../g++_4%3a4.6.3-8_powerpc.deb) ...
Processing triggers for man-db ...
Setting up libstdc++6-4.6-dev (4.6.3-14) ...
Setting up g++-4.6 (4.6.3-14) ...
Setting up g++ (4:4.6.3-8) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
admin@XorPlus$