Installing and Removing License for PICOS go2cli Version
Installing License under CLI Operation Mode
The following steps describe how to install a license under CLI operation mode for PICOS go2cli version.
Step 1 Before loading a license, upload the license file to the device. The following example uploads the license file 10GE-SITE-PICA8.lic to the default path.
By default, the TFTP downloaded file is saved in directory /cftmp/.
admin@XorPlus> file tftp get remote-file /tftp/license/10GE-SITE-PICA8.lic local-file 10GE-SITE-PICA8.lic ip-address 10.10.50.22
Step 2 Run the license install <file-name> command to install the license.
admin@XorPlus> license install /cftmp/10GE-SITE-PICA8.lic
When the license has been successfully installed, it will display the following information:
License successfully added, the switch need to be rebooted to activate the license. |
Step 3 Reboot the switch or restart PICOS to activate the license. Choose either one:
- Reboot the switch
admin@XorPlus> request system reboot
- Restart PICOS service
admin@XorPlus> start shell sh admin@XorPlus:~$ sudo service picos restart admin@XorPlus:~$ exit admin@XorPlus>
Step 4 After PICOS starts up, run the license show command to view the license information.
admin@XorPlus> license show { "Type": "10GE", "Feature": ["Base Product", "Layer3", "OpenFlow"], "Support End Date": "2020-10-28", "Hardware ID": "196B-A2AE-147A-73F2", "Site Name": "PICA8" }
Removing License under CLI Operation Mode
The following steps describe how to remove a license under CLI operation mode for PICOS go2cli version.
admin@XorPlus> license remove admin@XorPlus> license show No license installed. Use below information to create a license. Type: 10GE Hardware ID: 196B-A2AE-147A-73F2
Copyright © 2024 Pica8 Inc. All Rights Reserved.