From Linux Shell to L2/L3 Shell
Once in the Linux shell, user can use the command pica_sh or cli (under /pica/bin) to launch the L2/L3 CLI (or XORP CLI).
admin@XorPlus$ admin@XorPlus$cli Synchronizing configuration...OK. Welcome to PicOS L2/L3 on XorPlus admin@XorPlus>
To come back to the Linux Shell from the L2/L3 CLI (or XORP CLI), use the exit command.
admin@XorPlus> exit admin@XorPlus$
PICOS go2cli Version
NOTE:
For PICOS go2cli version, the operation is different.
For PICOS go2cli version, users go to PICOS CLI prompt after log in:
admin@Xorplus>
At PICOS CLI prompt, run “start shell sh” to enter Linux shell.
admin@Xorplus> start shell sh admin@Xorplus:~$
If you want to return from the Linux shell back to the CLI prompt, run "exit".
admin@Xorplus:~$ exit exit admin@Xorplus>
Copyright © 2024 Pica8 Inc. All Rights Reserved.