Displaying the Current Configuration
In L2/L3, non-default configuration can be displayed with the show commands. The command show all displays the default value of the current configuration. Default configurations are shown in the pica_default.boot file. The command show running-config displays the configuration active on the system.
admin@XorPlus# show vlans { vlan-id 200 { } } admin@XorPlus# admin@XorPlus# show all vlans { vlan-id 200 { description: "" vlan-name: "default" l3-interface: "" } }
admin@XorPlus> show running-config vlans { vlan-id 200 { } }
Copyright © 2024 Pica8 Inc. All Rights Reserved.