syslog notify

The syslog notify command configures whether to enable or disable the function of multi-window command configuration display on the user terminal.

Command Syntax

syslog notify <on | off>

Parameter

Description

on | off

Enable or disable multi-window command configuration display on the user terminal. The value is on or off.

on: enables command configuration display on the user terminal.

off: disables command configuration display on the user terminal.

The default value is on.

Usage Guidelines

The CLI window will not synchronously print the configurations of the same switch from other CLI windows to the current CLI interface if disables the function of multi-window command configuration on the user terminal.

The function is window dependent, that is, it will take effect based on CLI windows regardless of the CLI login method (Console or SSH) or the login IP of terminal or the login users.

When the window is restarted, the configuration of multi-window command configuration display on the user terminal function will go to the default value.

NOTE:

You can configure this command either in Linux shell or CLI mode as shown below:

From the ">" prompt, use the following format,

admin@Xorplus> syslog notify on

From the "#" prompt, use the following format,

admin@Xorplus# run syslog notify on

Example

• Enable the function of multi-window command configuration display on the user terminal.

admin@Xorplus> syslog notify on

• Disable the function of multi-window command configuration display on the user terminal.

admin@Xorplus> syslog notify off