syslog notify
The syslog notify command configures whether to enable or disable the function of multi-window command configuration display on the user terminal.
Command Syntax
syslog notify <on | off>
Parameter
Parameter | Description |
on | off | Enable or disable multi-window command configuration display on the user terminal. The value is on or off. on: enables command configuration display on the user terminal. off: disables command configuration display on the user terminal. The default value is on. |
Usage Guidelines
The CLI window will not synchronously print the configurations of the same switch from other CLI windows to the current CLI interface if disables the function of multi-window command configuration on the user terminal.
The function is window dependent, that is, it will take effect based on CLI windows regardless of the CLI login method (Console or SSH) or the login IP of terminal or the login users.
When the window is restarted, the configuration of multi-window command configuration display on the user terminal function will go to the default value.
NOTE: You can configure this command either in Linux shell or CLI mode as shown below:
   admin@Xorplus> syslog notify on
   admin@Xorplus# run syslog notify on |
Example
• Enable the function of multi-window command configuration display on the user terminal.
admin@Xorplus> syslog notify on
• Disable the function of multi-window command configuration display on the user terminal. Â
admin@Xorplus> syslog notify off
Copyright © 2024 Pica8 Inc. All Rights Reserved.