set protocols dot1x interface auth-mode web
The set protocols dot1x interface auth-mode web command enables the Web authentication mode on a specified interface.
Command Syntax
set protocols dot1x interface <interface-name> auth-mode web
Parameter
Parameter | Description |
interface <interface-name> | Specifies the physical interface name. The value could be ge-1/1/1, xe-1/1/2, and so on. |
Usage Guidelines
When no NAC authentication mode and the CLI command set protocols dot1x interface <interface-name> are configured, the port is open to the user; but if the CLI command set protocols dot1x interface <interface-name> is configured, the port becomes blocked.
Example
-  Enable Web authentication mode on interface ge-1/1/1.
admin@Xorplus# set protocols dot1x interface ge-1/1/1 auth-mode web admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.