set interface aggregate-ethernet routed-interface sub-interface vlan-id

The set interface aggregate-ethernet routed-interface sub-interface vlan-id command creates a sub-interface and adds it into a VLAN. When creating a sub-interface, VLAN ID needs to be specified at the same time.

Command Syntax

set interface aggregate-ethernet <lag-name> routed-interface sub-interface <sub-interface-name> vlan-id <vlan-id>

Parameter

Parameter	Description
aggregate-ethernet <lag-name>	Specifies the name of a LAG port. The value is like ae1, ae10, etc.
sub-interface <sub-interface-name>	Specifies the sub-interface name. The value could be up to 15 alphanumeric characters (including three special characters . – and @). NOTE: To avoid conflict with the preserved interface names, the routed interface name and sub-interface name must start with the string "rif-". Otherwise, commit will fail with the error message "The name of interface must start with "rif-".
vlan-id <vlan-id>	Specifies the VLAN ID. The value is an integer that ranges from 2 to4094.

Example

Create a sub-interface and add to VLAN 10.

admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface enable true
admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface name rif-ae3
admin@Xorplus# set interface aggregate-ethernet ae3 routed-interface sub-interface rif-ae3.1 vlan-id 10
admin@Xorplus# commit