PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.3_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Port Security Commands
IPv6 Neighbor Discovery Protocol Command Reference
Routed Interface
L3 Interface
•
interface aggregate-balancing hash-mapping field ethernet-destination-address disable
Uplink Failure Detection Commands
•
run show interface ufd
•
set interface ufd link-to-monitor
•
set interface ufd link-to-disable
•
interface aggregate-balancing hash-mapping field ethernet-source-address disable
•
interface aggregate-balancing hash-mapping field ethernet-type disable
•
interface aggregate-balancing hash-mapping field ingress-interface disable
•
interface aggregate-balancing hash-mapping field ip-destination disable
•
interface aggregate-balancing hash-mapping field ip-protocol disable
•
interface aggregate-balancing hash-mapping field ip-source disable
•
interface aggregate-balancing hash-mapping field port-destination disable
•
interface aggregate-balancing hash-mapping field port-source disable
•
interface aggregate-balancing hash-mapping field vlan disable
•
set interface aggregate-ethernet
•
set interface aggregate-ethernet description
•
set interface aggregate-ethernet disable
•
interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
•
set interface aggregate-ethernet aggregated-ether-options lacp
•
interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
•
interface aggregate-ethernet <lag_name> backup-port delay
•
interface aggregate-ethernet <lag_name> backup-port interface
•
interface aggregate-ethernet <lag_name> backup-port mode
•
interface aggregate-ethernet <lag_name> crossflow enable
•
interface aggregate-ethernet <lag_name> crossflow local-control
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
•
interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
•
interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
•
set interface aggregate-ethernet family ethernet-switching port-mode
•
set interface aggregate-ethernet family ethernet-switching vlan members
•
interface aggregate-ethernet <lag_name> hash-mapping mode
•
interface aggregate-ethernet <lag_name> mtu
•
interface aggregate-ethernet <lag_name> snmp-trap
•
interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
•
interface aggregate-ethernet <lag_name> storm-control <mode> pps
•
set interface bpdu-tunneling destination-mac
•
interface cut-through-mode
•
set interface ecmp hash-mapping field ingress-interface disable
•
set interface ecmp hash-mapping field ip-destination disable
•
set interface ecmp hash-mapping field ip-protocol disable
•
set interface ecmp hash-mapping field ip-source disable
•
set interface ecmp hash-mapping field port-destination disable
•
set interface ecmp hash-mapping field port-source disable
•
set interface ecmp hash-mapping field vlan disable
•
interface ecmp max-path
•
interface ethernet-switching-options buffer queue-limit
•
interface ethernet-switching-options mac-table-aging-time
•
interface gigabit-ethernet <port> backup-port delay
•
interface gigabit-ethernet <port> backup-port interface
•
interface gigabit-ethernet <port> backup-port mode
•
interface gigabit-ethernet <port> crossflow enable
•
interface gigabit-ethernet <port> crossflow local-control
•
interface gigabit-ethernet <port> description
•
interface gigabit-ethernet <port> disable
•
set interface gigabit-ethernet ether-options 802.3ad
•
interface gigabit-ethernet <port> ether-options flow-control
•
set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
•
interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
•
interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
•
set interface gigabit-ethernet family ethernet-switching port-mode
•
set interface gigabit-ethernet family ethernet-switching vlan members
•
interface gigabit-ethernet <port> mtu
•
interface gigabit-ethernet <port> power-preemphasis-level
•
interface gigabit-ethernet <port> snmp-trap
•
set interface gigabit-ethernet speed
•
set interface gigabit-ethernet auto-speeds
•
interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
•
interface gigabit-ethernet <port> storm-control <mode> pps
•
interface gigabit-ethernet <port> wred queue <value> drop_probability
•
interface gigabit-ethernet <port> wred queue <value> ecn_thresh
•
interface gigabit-ethernet <port> wred queue <value> enable
•
interface gigabit-ethernet <port> wred queue <value> max_thresh
•
interface gigabit-ethernet <port> wred queue <value> min_thresh
•
interface max-acl-rule-limit <egress/ingress>
•
interface max-route-limit
•
show interface aggregate-ethernet <lag_name>
•
show interface aggregate-ethernet <lag_name> dot1q-tunneling
Show more below
Blogs
PICOS-4.4.3_Configuration_Guide
/
/
Interface Configuration Commands
/
Uplink Failure Detection Commands
Summarize
Uplink Failure Detection Commands
Tracy Yang
Owned by
Tracy Yang
Nov 28, 2023
1 min read
Loading data...
run show interface ufd
set interface ufd link-to-monitor
set interface ufd link-to-disable
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 11, "requestCorrelationId": "6e3c7febd8d24e19b305ed6d28ac6126"}