interface gigabit-ethernet <port> storm-control <mode> pps
Users can set storm control mode for a specified port.
Command Syntax
set interface gigabit-ethernet <port> storm-control <mode> pps <value>
delete interface gigabit-ethernet <port> storm-control [<mode> |Â pps]
Parameter
• <port>ethernet switching port identifier,the valid ports range 1-52
• <mode> packets forwarding mode
- broadcast Storm control for broadcast traffic
- multicast Storm control for multicast traffic
- unicast Storm control for unicast traffic
•<value> Packets per second, [0..30000000]. Note, when the value of the storm control is set to 0, it means that data packets are not allowed to pass.
Example
• This example set broadcast storm control for ge-1/1/1:
admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 storm-control broadcast pps 1000 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.