set vlans vlan-id vlan-name
To create a VLAN, use the set vlans vlan-id command in L2/L3 configuration mode. To give a name to the VLAN, use the optional vlan-name keyword. To remove a VLAN, use the delete form of the command.
Command Syntax
set vlans vlan-id vlan-id [ vlan-name vlan-name ]
delete vlans vlan-id vlan-id
Parameters
vlan-id | VLAN identifier. The range is from 1 to 4094. A range of VLAN identifiers can be specified, for example, 2,3,5-100. |
vlan-name | VLAN name. Up to 32 alphanumeric characters in length. |
Example
This example creates VLAN 10 and names it MyVLAN:
admin@Switch# set vlans vlan-id 10 vlan-name MyVLAN
Copyright © 2024 Pica8 Inc. All Rights Reserved.