set protocols ospf6 interface mtu-ignore

Owned by Tracy Yang
Nov 28, 2023
1 min read

Run the command set protocols ospf6 interface mtu-ignore to disable ignore MTU mismatch detection on this interface.

Run the  command delete protocols ospf6 interface mtu-ignore to delete this configuration.


Command Syntax

set protocols ospf6 interface <interface-name> mtu-ignore

protocols ospf6 interface <interface-name> mtu-ignore


Parameter

Parameter

Description

interface <interface-name>Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.


Example

  •  This example configures the MTU mismatch detection on the interface vlan10.
admin@XorPlus# set protocols ospf6 interface vlan10 mtu-ignore
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.