/
run show bfd peers

run show bfd peers

Owned by Tracy Yang
Nov 28, 2023

The run show bfd peers command displays informations about all the BFD sessions.


Command Syntax

run show bfd [vrf <vrf-name>] peers [brief | counters]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

[brief | counters]

Optional.

  • brief: Displays brief information about all the BFD sessions.
  • counters: Displays the counter information about all the BFD sessions.


Example
• Show information about all the BFD session.

admin@Xorplus# run show bfd peers 
BFD Peers:
        peer 3.3.3.3 local-address 3.3.3.2 vrf vrf1 interface vlan100
                ID: 984327
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 20
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: 30ms
                        Echo transmission interval: 30ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled

        peer 3.3.3.3 local-address 3.3.3.2 vrf default interface vlan3
                ID: 3820553826
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 2
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: 10ms
                        Echo transmission interval: 10ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled

        peer 2.2.2.2 multihop local-address 2.2.2.3 vrf vrf1
                ID: 219448436
                Remote ID: 0
                Active mode
                Minimum TTL: 254
                Status: down
                Downtime: 1 hour(s), 53 minute(s), 4 second(s)
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 3
                        Receive interval: 300ms
                        Transmission interval: 300ms
                        Echo receive interval: 50ms
                        Echo transmission interval: disabled
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled


Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.