run clear mvrp interface statistics

Owned by Tracy Yang
Nov 28, 2023
1 min read

The run clear mvrp interface statistics command is used to clear the MVRP packets statistics.

NOTE:

The previous statistics cannot be restored after clearing, so be careful when using this command.


Command Syntax

run clear mvrp interface <interface-name> statistics


Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name that enabled MVRP. The value could be a physical interface or a LAG interface.


Example

  • Clear the statistics information of MVRP.
admin@PICOS# run clear mvrp interface te-1/1/7 statistics
admin@PICOS# run show mvrp interface te-1/1/7 statistics
packet_received: 0
packet_sent:    0




Copyright © 2024 Pica8 Inc. All Rights Reserved.