set protocols mvrp edge-switch

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols mvrp edge-switch command can be used to enable or disable MVRP edge-switch function.

The delete protocols mvrp edge-switch command deletes the configuration.

NOTE:

This command can be enabled only on the edge switches.


Command Syntax

set protocols mvrp edge-switch <true | false>


Parameters

Parameter

Description

<true | false>

Enable or disable MVRP edge-switch function. The value could be true or false.

  • true: Enable MVRP edge-switch function.
  • false: Disable MVRP edge-switch function.

By default, MVRP edge-switch function is disabled.


Example

  • Enable MVRP edge-switch function.
admin@PICOS# set protocols mvrp edge-switch true
admin@PICOS# commit






Copyright © 2024 Pica8 Inc. All Rights Reserved.