S5810-48TS-P Switch
System LED Definition
LED Name | Status | Detailed Description |
Status LED | OFF | No power supply. |
Blinking green | Boot-up in progress. | |
Solid green | The system completes initialization and works normally. | |
Solid amber | Temperature exceeds alarm threshold 50ºC but less than 60ºC. | |
Solid red |
| |
PS1 LED | OFF | Power supply not present. |
Solid green | This power is operating normally. | |
Solid red | Power module failure or need to connect to the AC power line. | |
PS2 LED | OFF | Power supply not present. |
Solid green | This power is operating normally. | |
Solid red | Power module failure or need to connect to the AC power line. | |
MGMT LED | OFF | No Link. |
Solid green | Port linked operating at 1000M. | |
Solid amber | Port linked operating at 10M or 100M. | |
Flashing | Transmit/Receive is activity. | |
PoE LED (controlled by PoE button on the front panel) | Solid green | Port LEDs indicate switching status. |
Solid amber | Port LEDs indicate PoE power supply status. |
NOTE:
PoE button
The 48x1G RJ45 ports on the front panel support PoE.
PoE button on the front panel controls whether the port LED indicates data switching status or PoE power supply status of the first 48 ports.
By default, port LED indicates data switching status of the port. PoE LED on the front panel of system LED block is solid green.
If pressed the PoE button, the port LED indicates PoE power supply status of the port. PoE LED on the front panel of system LED block changes to solid amber.
Port LED Definition
10/100/1000BASE-T RJ45 port LED
Feature | Detailed Description |
Non-PoE (controlled by PoE button on the front panel) |
|
PoE (controlled by PoE button on the front panel) |
|
SFP+ 10G port LED
Feature | Detailed Description |
SFP+ 10G port LED |
|
Â
Copyright © 2024 Pica8 Inc. All Rights Reserved.