Use the command set protocols ospf6 area to configure area for the OSPFv3 instance.

Run the command delete protocols ospf6 area to delete this configuration from the switch.

Command Syntax

set protocols ospf6 [vrf <vrf-name>] area{<ipv4> | <area-id>}

delete protocols ospf6 [vrf <vrf-name>] area{<ipv4> | <area-id>}

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPFv3 instance.
area{<ipv4*> \| <*area-id>}	Specifies the area for OSPFv3, the value could be in IPv4 dotted decimal format or an integer ranging from 0 to 4294967295.

admin@XorPlus# set protocols ospf6 area 0.0.0.0

Browser not supported