set routing pbr map sequence action nexthop

The set routing pbr map sequence action nexthop command configures an action to redirect packets to a next-hop IP address for policy-based routing. The next-hop address must be directly connected and reachable without supporting recursion.

The delete routing pbr map sequence action nexthop command deletes the configuration.

Command Syntax

set routing pbr map <map-name> sequence <sequence-number> action nexthop <ip-address> [nexthop-vrf <vrf-name>]

delete routing pbr map <map-name> sequence <sequence-number> match action nexthop <ip-address> [nexthop-vrf]

Parameter

Parameter	Description
map <map-name>	Specifies the map name of a PBR policy. The value is a string.
sequence <sequence-number>	Specifies sequence number. The value is an integer that ranges from 1 to 700.
nexthop <ip-address>	Specifies next-hop IP, it could be a specific IPv4/IPv6 address. For example, 192.168.1.10.
nexthop-vrf <vrf-name>	Optional. Specifies the name of the VRF for the next-hop route. When a VRF name is specified, find the next hop routing information from the specified VRF domain. When no VRF is specified, find the next hop routing information from the default VRF.

Example

Configure an action to redirect packets to a next-hop IP address for policy-based routing.

admin@PICOS# set routing pbr map PBR_map1 sequence 100 action nexthop 10.30.1.10
admin@PICOS# commit