set protocols dot1x interface auth-mode web

Owned by Tracy Yang
Mar 19, 2024
1 min read

The set protocols dot1x interface auth-mode web command enables the Web authentication mode on a specified interface.


Command Syntax

set protocols dot1x interface <interface-name> auth-mode web


Parameter

Parameter

Description

interface <interface-name>

Specifies the physical interface name. The value could be ge-1/1/1, xe-1/1/2, and so on.


Usage Guidelines

When no NAC authentication mode and the CLI command set protocols dot1x interface <interface-name> are configured, the port is open to the user; but if the CLI command set protocols dot1x interface <interface-name> is configured, the port becomes blocked.


Example

  •   Enable Web authentication mode on interface ge-1/1/1.
admin@Xorplus# set protocols dot1x interface ge-1/1/1 auth-mode web
admin@Xorplus# commit




Copyright © 2024 Pica8 Inc. All Rights Reserved.