run show igmp-snooping querier
- Tracy Yang
Owned by Tracy Yang
Mar 19, 2024
1 min read
Loading data...
The run show igmp-snooping querier command shows the configuration information and status of the querier in a VLAN.
Command Syntax
run show igmp-snooping querier vlan <vlan-id>
Parameter
Parameter | Description |
vlan <vlan-id> | Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
Example
- Show the configuration information and status of the querier.
admin@XorPlus# run show igmp-snooping querier vlan 1 Vlan 1: IGMP switch querier status -------------------------------------------------------- admin state : Disabled admin version : 2 source IP address : 0.0.0.0 other querier timer : 1 operational state : Non-Querier
Copyright © 2024 Pica8 Inc. All Rights Reserved.