run show igmp-snooping querier

The run show igmp-snooping querier command shows the configuration information and status of the querier in a VLAN.


Command Syntax

run show igmp-snooping querier vlan <vlan-id>


Parameter

Parameter

Description

vlan <vlan-id>

Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.


Example

  •   Show the configuration information and status of the querier.
admin@XorPlus# run show igmp-snooping querier vlan 1
Vlan 1:   IGMP switch querier status
--------------------------------------------------------
admin state                    : Disabled
admin version                  : 2
source IP address              : 0.0.0.0
other querier timer            : 1
operational state              : Non-Querier

Copyright © 2024 Pica8 Inc. All Rights Reserved.