The set protocols pim interface sm command is used to enable PIM-SM function on a specific L3 interface.

The delete protocols pim interface sm command is used to disable PIM-SM function on a specific L3 interface.

Command Syntax

set protocols pim interface <interface-name> sm

Parameter

Parameter	Description
interface <interface-name>	Specifies an L3 interface. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.The value is a string.

Example

admin@Xorplus# set protocols pim interface vlan-2 sm
admin@Xorplus# commit

Browser not supported