run show mroute

The run show igmp mroute command displays the PIM routing table information.

Command Syntax
run show igmp mroute [vrf <vrf-name>]

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Example

Display the PIM routing table.

admin@XorPlus# run show mroute
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned
       R - RP-bit set, F - Register flag, T - SPT-bit set

Source          Group           Flags   Proto  Input            Output           TTL  Uptime
71.1.1.100      231.1.1.1       SFP             none   vlan771          none             0    --:--:--
81.1.1.100      231.1.1.1       SCT             IGMP   vlan4000         vlan771          1    00:03:57