PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.4_Configuration_Guide (Special Release)
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.4 (Special Release)
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
•
PICOS Supported Features
•
Collection of Feature Specification of Different Platforms
Command-Line Interface
System Administration
Interface Management Configuration Guide
Ethernet Ports Management Configuration
•
Physical Ethernet Port Configuration
•
Configure Port Speed of eth0 Out-of-Band Management Interface
Interface Rate Configuraion
•
Introduction of Interface Rate
•
Configuring the Force Rate of an Interface
•
Configuring the Auto-Negotiation Mode
•
Port Security Configuration
•
CDR Function Configuration
•
Time Domain Reflectometry (TDR)
•
Configuring Port Breakout and Merge
•
Configuring Port Mapping On S4148 Series Switch
•
10G-Base-KR Interface Configuration
•
Forwarding Error Correction (FEC)
•
Configuring a Loopback Interface
•
Layer 3 VLAN Interface Configuration
Configuring Routed Interface
•
Uplink Failure Detection
Layer 2 Switching Configuration
Layer 3 Routing Configuration
IP Multicast Routing Configuration
ACL Configuration
QoS Configuration
VXLAN Configuration
BGP EVPN Configuration Guide
Generic Routing Encapsulation Protocol (GRE)
OpenFlow in Crossflow Mode
PICOS Routing and Switching Command Reference
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.4.4_Configuration_Guide (Special Release)
/
/
Ethernet Ports Management Configuration
/
Interface Rate Configuraion
Summarize
Interface Rate Configuraion
Tracy Yang
Owned by
Tracy Yang
May 24, 2024
1 min read
Loading data...
Introduction of Interface Rate
Configuring the Force Rate of an Interface
Configuring the Auto-Negotiation Mode
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 11, "requestCorrelationId": "c84d9764168341b3bd92ac2935e376d3"}